Kawasaki Motorcycle Forums banner

ER6F/650R LED Relay (Location to wire)

923 views 1 reply 2 participants last post by  Cregeyo 
#1 ·
Hi Guys,

so, obvs a bit new to wiring on my bike, I have installed the new tail tidy and LED rear blinkers, but the fronts are still bulb.

From this i understand i need a solid state switching relay?
what ever that is!

but where do i wire this in, can someone post me a pic of the location i am to wire this into.

Thanks,
:)
 
#2 ·
For me, 2010 650, it was under the upper fairings. Without measuring I say 6 inches or so below the left (sitting on the bike perspective) mirror or just above the radiator. Very easy to switch out, but not so easy to get to. Service manual is your best friend and a must have for any do it yourselfer!

I needed the relay with the use of an integrated tail light. Without it, the sequential lighting turn signals would blink erraticly and not function as intended/designed.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top