Kawasaki Motorcycle Forums banner

05/06 zx6r 636 Race Bike part out

14K views 85 replies 26 participants last post by  RandomPhantom 
#1 · (Edited)
Have a 2006 ZX6R race bike I've decided to part out. Still willing to take offers on it whole.

Clean, clear FL title frame $1,500 -- some dings and cosmetic marks, but straight and in good working condition

1 set of wheels $300 -- good working condition, comes with bearings

07/08 zx6r nissin calipers $150 -- good working condition

spare 05/06 zx6r tokico calipers $50

spare fuel tank $50 -- has been painted, but no damage or issues

assorted spare sprockets, new and used

Full Akrapovic titanium exhaust $800 -- excellent condition

Woodcraft frame sliders $20 -- bent bolt on one side and scuffed pucks

PC3 with custom map for full akra exhaust $250

Hotbodies race fairings $300 -- Full upper, lower, and superbike tail. My girlfriend recently dropped it trying to move it, so it has some damage to the front right nose of the fairings. I'm willing to repair it before selling for an extra $100.

Forks $400 -- Race Tech Gold GR2 valving, fresh fluid and seals with 2 races on them

Nearly new fuel pump $40 -- only two races on it

Several spare windscreens $75 each -- NEW windscreens from my previous sponsor

Right stock rearset $100 -- no damage, good condition

Left stock rearset $100 -- no damage, good condition

Stock clipons $50 -- signs of wear under the grips, but straight and in good working condition

ram air tube $30 -- cracked on top and missing one mount

air box $50 -- good condition

k&n air filter $40 -- good condition

upper injector rail $50 -- good working condition

throttle bodies $75 -- includes lower injectors, associated fuel rail, and idle screw/cable

radiator $100 -- has one repair around one fitting and a minor amount of bent fins from regular use. straight and in good working condition.

subframe $150 -- straight.

Swingarm $60 -- missing one spool mount on right (brake) side and has some dings, but is straight.

gauge cluster $150 -- off the top of my head, I believe it has 28k miles. great working condition, possibly minor scuffs (not on gauge face), no broken tabs. will include mounting bolts.

rear caliper $50 -- good condition, comes with EBC extreme pro pads (what I use for road racing) with tons of life left (I don't use the rear brake lol).

rear SS brake line $40 -- black, excellent condition.

front axle $20 -- good condition, drilled on each side for safety wire.

rear axle x 2 $20 each -- good, straight condition. I believe one is drilled for safety wire but I'll have to check.

fairing stay x 2 $40 each -- one is new and one is like new (what I've had on my bike).

front rotors x 2 sets, $100 per set -- good, straight condition.

rear rotor $30 -- good, straight condition.

upper triple clamp $80 -- straight, good condition. has small hole drilled in front of right side for better positioning of MC.

lower triple x 2, $100 each -- great condition, straight, will include upper and lower bearings which have been regularly cleaned and greased.

regulator/rectifier $60 -- good, working condition. no burnt plugs.

rear brake master cylinder and reservoir $40 -- good working condition.

relay box (the one mounted to the shift side of the subframe) $75 -- good working condition.

t-rex rear axle blocks with spools $30 -- as seen here http://www.ebay.com/itm/30070817654...iewitem=&sspagename=ADME:L:OC:US:3160&vxp=mtr, may have scuffs/wear on spools. good working condition.


Several sets of Dunlop GPA and Ntec takeoffs $25 per tire -- most only have wear on sides of tires and would have a lot of life left for street use. (local pickup only)

Many, many more parts. The bike is a complete race bike, so I have everything a running bike would have ready to race.


More pictures on request.
 

Attachments

See less See more
2
#3 ·
I have a shift rod that I can include with it. I bought from Annitori when I got the QS, but thanks to the way the frame spar juts out on these bikes you have to bend the shift rod to position it around the frame spar for reverse shift. I'll grab a pic when I get home that shows what I'm talking about in case that's not clear.
 
#4 ·
What color is the tank? does it have a cap of any sort? Lock, Key? or bare tank shell?

Work me a price on the tank and pump shipped to 35640 and PM me.
 
#5 ·
The one on my bike is painted (rattle can with a clear coat) blue and white with one of my sponsor stickers on it. It does have some areas as you can see where the paints been chipped or worn through. Has a GoPro mount on it as you can see. If you want it, I'll leave it on. Otherwise I can yank it off before I send it.

Has a gas cap and key that I'll throw in as well (I don't have an ignition switch or truck setup, so might as well). Could do $120 + shipping for those and the pump, and it may take me a couple days to get the chance to get a shipping quote. My guess is $20-$30.

The other is half black and half white. Would knock $20 off for the worse paint job. lol

Don't have pictures at the moment as it's buried in my shed but I'll dig it out tomorrow. I thought I had pictures of it somewhere but I'm coming up with nothing searching my computer.
 

Attachments

#12 ·
I'm confused now. The tanks listed at $50, Pump at $40. That's $90. Then you said "Could do $120 + shipping for those and the pump" $120+ Shipping? That's when my head started to spin... Do you mean around $120 including shipping, Based on your $30 guess I assume?

Ohh here's another bit I'm looking for I was wondering if you have. The little bracket that screws to the lower triple that holds the front brake line. Got one of those?

Anyway Sorry for the confusion, Just find out about the shipping, I will PM you my actual address to make the quote easier.
 
#6 ·
Quickshifter pics.... I remembered having to been the shift rod more than it actually is so I guess I was just remembering what a pain it was. lol

Anyway, the first pic shows the most angle there is in the rod. The others are the other sides of the unit. I'm hoping to dismantle the bike over tomorrow night and the next night to have stuff ready to sell, so I'll grab a shot of the entire unit (injector plugs and box) then and put it up.
 

Attachments

#8 ·
PM'd you about the captive wheel spacers. Thanks!
 
#11 ·
Edited to add many more items. pm's replied to. Will be doing the next round of disassembly tonight so most things should be ready to ship after tonight.

A couple notes, I take paypal but will require the money either be sent as a gift or have 3% added to the asking price to cover the paypal fees. Your call.

Also, for most items I'm happy to cover the shipping (USPS with a tracking number and insurance) but some of the bigger or heavier items will simply cost more to ship than I'm willing to eat. For many/most of the smaller items, shipping is included in the asking price.

I haven't decided for sure yet but some things like the engine, frame, and other particularly large items may not be shipped and may be for local pickup only.
 
#15 · (Edited)
God so many goodies! Sent you a PM

Sent from Motorcycle.com Free App
pm'd you back about the rearsets. You're #2 in line on the rearsets. I'll post some pics up here.

I believe they can use a stock shift rod, it would thread up fine, though you may need to look at a longer shift rod depending on what position you would use on the rearsets (in other words, if they're positioned all the way up and back you may need a longer shift rod, but I don't actually know for sure).

I can't tell you for sure because I've always had a quickshifter setup, so the stock shift rod wasn't usable for me and I don't know how the stock rod works as far as the length goes. It's quite possible the stock rod is all you need, but I can't say for sure.
 
#19 ·
Ahh ok now I see, there are two fuel tanks. What color/condition is the other tank in? Pics if possible.

also, you didn't mention it, But are either of the tanks priced including the front half cover? If so LMK, I don't need it so if you could/can/whatever sell it to somebody else that's cool with me. The set of plastics I am ordering comes with everything but a tank.

The other issue is once I get my tank I am probably shipping it to china to be painted with the rest of the set. LOL. That should be interesting.
 
#20 ·
Both would include the front cover but I could probably sell it. If you really don't want it, I'll just keep it and try to sell it. I Will snap a couple pics in a second of the other tank. Just got the entire bike disassembled so I'm uploading massive photos to people who want stuff.

And good luck with China... that's a hell of a plan! haha

In the process of draining and venting the tank now so hopefully it'll be ready to go for tomorrow.
 
#22 ·
Sounds good. I'm about to cut my hair and take a shower so I'll be up for a bit. One way or another we'll get a tank picked out, priced, paid and all by Saturday. I don't care if it ships this weekend or not. It's no huge rush on my end.
 
#24 ·
yeah, That's fine as long as its not dented, rusty etc. and you said that was a bit cheaper I think.. which is always good! I'll get up with you tomorrow or sat and we'll get the specifics sorted.

Night!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top