This is an 09 zx6, running 93 sunoco. Map was made on a 95 degree day at vir.
Mods to the bike include bmc air filter with an akro slip on and link pipe.
I have a map that I got from here a while ago I've been using, its for 07 6r, with
Akra full evo,
bmc race, and some other mods.. As someone overseas posted this, I don't have their dyno, or their elevation.. If you want it PM me--
Just found my map, for those who've been interested I'm going to upload it here : The one titled Fuel Moto is the map I use, there is another one on there, I forgot where I got it from, but it says Leo Vince, perhaps the PC3 site.. Enjoy !
Akra full
Block off plates and Kleen air mod
BMC Race filter
PCIII with ignition module
VP U4.4
This map produced 118 to the rear wheel on a hot and steamy day at sea level.
Akra full
Block off plates and Kleen air mod
BMC Race filter
PCIII with ignition module
VP U4.4
This map produced 118 to the rear wheel on a hot and steamy day at sea level.
If you don;t like my offer, you can go spend $350- and have your own tuning done. I have a map, expertly tuned by a world renown tuner. If anyone wants it, I'm happy to sell a copy for like $20-.
$350-
-$20-
______
$330- savings, sounds like a pretty good deal to me.
The pump gas map, that I'll gladly share for free. It produced 112 to the rear wheel and we got an additional 1 1/2 FT # torque. But I can't seem to get it to upload, says the file type is wrong.
If anyone wants it, just PM me your e-mail addy. I'll send it over.
Installed a used PC3 today.
Pulled the current map off of it. Says it's custom, but I have no idea why.
No idea where it was from orig, so not sure what elevation or dyno is.
Comments say
Code:
2007-2008 Kawasaki ZX6R
Yoshimura RS-5 full exhaust
Stock or aftermarket air filter
WFO Motorsports custom map
618-931-3087
okayy goshhh its 340 ft lol
but i have a question.. i used the "full yoshi exhaust aftermarket or oem air filter" map from the power commander website. now what if i do the jumper mod? will i have to use the "euro specs full yoshi exhaust aftermarket or oem" map? since i read that doing the jumper mod converts the bike to euro specs i think..
and another question.. lets say i got something done to the bike making its engine a bit bigger like 374cc's will that significantly affect the map that i have to use?
okayy goshhh its 340 ft lol
but i have a question.. i used the "full yoshi exhaust aftermarket or oem air filter" map from the power commander website. now what if i do the jumper mod? will i have to use the "euro specs full yoshi exhaust aftermarket or oem" map? since i read that doing the jumper mod converts the bike to euro specs i think..
and another question.. lets say i got something done to the bike making its engine a bit bigger like 374cc's will that significantly affect the map that i have to use?
lol i would write the most sincere thank you post in the world if i can find a decent map to run on my bike, by the way i did some searching and came across a huge thread on those jeffo maps. any thoughts on this guy cuz from what i mostly read it was all for the zx14
Here is PC5 map build by autotune AT200 for my 2012 Ninja650 (european model aka w/ O2 sensor on exhaust), mod :
- Stock exhaust
- Stock air filter
- Plugged PAIR valve
- O2 sensor eliminator
For those twobros exhaust user, please note this map is too lean for u guys, u must get autotune to help build richer map for u'r exhaust with zero base map or just go to dyno man.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Kawasaki Motorcycle Forums
3.1M posts
110.5K members
Since 2002
A forum community dedicated to all Kawasaki motorcycles including the ZX-6R, KLR 650, Ninja 250, Ninja 250R, and Vulcan. Come join the discussion about performance, modifications, troubleshooting, maintenance, and more!