So I need a little help and would appreciate any help I get.
So here goes,
My bike runs and ride's but doesn't have a killswitch wired on.
I tried to wire one on but one of my CDI's (F8T07175) doesn't have enough wire's. It has five but four are from the stator and the other goes from the cdi and connects to the coil.
My other CDI (sure it's correct year but no numbers) Has Seven wires, BLACK/RED(stator) WHITE/GREEN(stator) WHITE/RED(stator)
It has one BLACK/Yellow, But that has hoop connection to ground to coil.
Has Two Black/white ( I Know One of them is for killswitch wire)
One BLACK which give the power to COIL.
BLACK/RED White/Green White/RED. These have direct color contact from my stator.
However, My stator has 4 colours.
BLACK/RED Green White/orange and YELLOW/BLACK
This YELLOW/BLACK from the stator is giving me mischief as it's the only one that doesn't have a direct link to match the CDI which has ability to wire kill switch.
I've tried to be as descriptive as possible in order for anyone to help. It's a KX 100-B model engine.
Link to photos/
CDI I WANT TO CONNECT. NO SPARK.