Kawasaki Motorcycle Forums banner

Search results

1-20 of 478 Results
Advanced Search
  1. Home Made PAIR Block-Offs And Explanation

    Ninja 500R
    ^ I was kind of thinking that myself. Wondering if some sort of small gasket should be used with it.
  2. EX500 Engine Swap

    Ninja 250R
    I'm no expert on the PAIR system. If I had to guess, by looking at the reed valves they appear to just not let air flow the wrong direction when the Pair valve is closed. I know the PAIR valve is vacuum activated and will close when the vacuum reaches 57-65 kPa. So I would think it is...
  3. Is it OK to run my 2019 Ninja 650 dry to calculate maximum range?

    Ninja 650R, ER6
    Your not over filling the tank are you? You don't want to fill it completely to the top.
  4. EX500 Engine Swap

    Ninja 250R
    Looks like your reed valves were already missing. Not that you need them of coarse, just an observation.
  5. Is it OK to run my 2019 Ninja 650 dry to calculate maximum range?

    Ninja 650R, ER6
    Plus you don't have to run a tank dry to calculate your miles per gallon, or kilometers per litre.
  6. EX500 Engine Swap

    Ninja 250R
    I think I have heard that swap has been successfully done before. Good luck with it. This should make for an interesting thread.
  7. Power problems

    New Member Introductions
  8. We Are Live - Community Feedback

    Community Help
    All my alert options were checked. I went ahead and hit the save button in case that was what was wrong. I will wait until someone replies to a thread I'm watching to see if that worked. Thanks
  9. We Are Live - Community Feedback

    Community Help
    I'm not getting "alerts" when someone replies to a thread that I have. Aren't I supposed to?
  10. 03 636 stator bolts

    2003-2004 ZX-6R
    Probably, I'm not a big fan of Home DeCrap hardware. It should be OK on this application (low stress requirements). Easiest way would be to bring in an old one to match up. Just be sure to get the correct thread pitch.
  11. 03 636 stator bolts

    2003-2004 ZX-6R
    Kawasaki part # 92151-1626 2003 Kawasaki NINJA ZX-6R (ZX636-B1) Generator | Ron Ayers
  12. New Member & help needed Please

    New Member Introductions
    I would get a service manual and run some multi-meter diagnostic test's.
  13. New Member & help needed Please

    New Member Introductions
  14. Hello

    New Member Introductions
  15. New from South Florida!!

    New Member Introductions
  16. A good replacement of spark plug coil and wire?

    Ninja 250R
    Yeah, you need a new on (replace both sides.) I would just get new wires also.
  17. New to forum - Hello

    New Member Introductions
  18. ZR 550 1996 carb question

    All Other Models
    I'm a little confused. Do you have 1 loose piece, or 3?
  19. 2006 650r fork tube diameter

    Ninja 650R, ER6
    :geek: Giving it a circumference of approximately 128.79 mm.
  20. 2006 650r fork tube diameter

    Ninja 650R, ER6
    If you don't have measuring calipers. You can get the diameter by wrapping a string around the fork, measure how long the string is and divide by pi.
1-20 of 478 Results
Top