Kawasaki Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Two Wheeled Discussion
    Recently just had my clutch go out on my 07 zx6r and i purchased the Barnett Kevlar clutch kit. Took the old clutch out and noticed the friction plates have notches in them and the Barnett friction places do not. So what I am asking does it matter about them not having the notches as long as...
  2. New Member Introductions
    Recently my clutch went out on my 07 zx6r and I purchased the Barnett kevlar clutch kit went to swap clutch out an notice that the Barnett kit doesn't have the notches in the friction plates like the old friction plates that came out of the bike. Does it matter ?
  3. Ninja 650R, ER6
    Long story shot I was doing maintenance on my bike and the clutch was engaged for a day or so. Now after I removed the cable it will not disengage, even when I prop the clutch swingarm closed, the rear wheel rotates on rear stand very quickly. Also I cannot get the clutch cable back on since it...
  4. Z750, Z800, Z1000
    So I've bought the bike with 63k km on the clock (39k miles), it currently has 69k km (43k miles) The old clutch began slipping around 1000km ago (600 miles) so I figured might as well replace everything with new parts: Clutch cable (OEM replacement part) EBC clutch springs TRW clutch plates...
  5. Versys
    Previous owner burned the clutch of an almost bnew versys 650. Had it replaced by a Kawasaki dealer. Power and torque comes on much better. BUT smell really strong burnt clutch smell. technician claims it's gas from cleaning oil spilled on the muffler or something.
  6. New Member Introductions
    Hello everyone !!this bike is new to me. wen i got it the clutch was wore out barely pulled the bike . so i replaced the plates toured the spring bolts to 17in pounds. put my rod back in. and it sets like the clutch lever should be pulled be for it gets any tension. I dont get it. It seems prity...
  7. Gear Section
    I was rear ended by a drunk driver on an atv while riding my 2000 zx6r , layed the bike down pretty hard on the left side and i have been since repairing the bike little by little. So far ive replaced the rear subframe( was bent horribly after the crash) , new rearsets ( because the shifter side...
  8. KLR & KLX
    Hi guys, while I was working on my bike KLX 250 2016 I was changing the levers I broke that piece of plastic on the clutch side, can anyone tell me what it is, and do I have to get new piece instead?
  9. New Member Introductions
    Hi guys, while I was working on my bike KLX 250 2016 I was changing the levers I broke that piece of plastic on the clutch side, can anyone tell me what it is, and do I have to get new piece instead?
1-9 of 9 Results
Top