Kawasaki Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Ninja 650R, ER6
    Story: 2019 Ninja 650. As the title says, no start-no crank. THIS ALL HAPPENED SHORTLY AFTER DROPPING THE BIKE A COUPLE TIMES. Flashing lines on gear indicator, and mileage. no crank no start condition majority of the time. Sometimes it will run for about 15-45 seconds then shut off. Code 39...
  2. ZX-10R
    I just picked up a high mileage gen 2 bike is pretty solid but has been neglected for a while. The bike is throwing code 39 which is ecu/can communication fault. Not communicating with the meter. Is this just a good bet that the ecu is fried? Bike runs fine but seems like the power is choked...
  3. Ninja 650R, ER6
    Hey guys, I just tested my bike for leaking current and noticed it did. When pulling the fuses I found the parasitic draw on the ECU to be 0.2mA. is this normal? And if not, what do i need to do?
  4. New Member Introductions
    Hi I have a 2002 zx7r I bought it off a guy for 800 bucks and the wire harness was all chewed up so I was trying to figure out the igniter diagram so I can run everything correctly if anyone could help me out with the igniter or ECU diagram that will be helpful by the way it's a 12 pin ecu /...
  5. All Other Models
    Hi guys, I'm new to the motorcycle-world and planning to buy a new Z125 since I only have A1-license. But I was wondering if it is possible to let the ECU reflash and if it would be worth it. I saw a video of a ninja 125 hitting 133kmh (82mph) with the ECU reflashed, but can't find much on the...
1-5 of 5 Results
Top