Kawasaki Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. Ninja 650R, ER6
    Anyone know what size and pitch is of the swivel nut at the rear part of the rigid brake pipe line on a ER6f 2010 ABS model? The photo shows the part I’m talking about…
  2. Ninja 650R, ER6
    Has anyone successfully removed the abs system from a 2012 - 2016 model? After 3 years of riding my st1050 with no abs i am reeeaallly not a fan of it. I know its easily to trade the bike in for another HOWEVER… its my first big bike and its incredibly fun to ride, and on the plus side its fun...
  3. Ninja 650R, ER6
    I'm looking for some rearsets for the 2011 ER6N that have the pillion footrest delete. I can find plenty for the 2012 and up models but not a lot of options for the 2011. My question is, are the 2012 rearsets compatible with the 2011 model? or can they be modified to suit? Thakns in advance!
  4. Two Wheeled Discussion
    The bike was involved in an accident last fall, bottom part of the engine was changed (oil pan, coolant pump, etc.). Got it back today (finally), assured that it was repaired and ready to go. Took it out on the road and noticed it bogged at around 1.5-3k RPM with periodicity. Impossible to run...
  5. Ninja 650R, ER6
    Hey guys, I noticed when I ride my 2009 ER-6F. That I have to get gas about every 200km (124,27 mi) (meaning a usage of about 29.4 mpg). I read online the fuel efficiency of the ER-6F should be around 4,76 l/100km (about 47 mpg). Which should give me about 320km (198,84 mi) since the tank can...
  6. Ninja 650R, ER6
    Hi all, I'm sure I'm not the first to ask and I probably won't be the last but here we go.. I've changed the stock rear indicators on my 2007 ER6-F to small LED ones and I know I need to change the flasher relay to stop them all flashing too fast, but I'm not sure where to find the relay. Can...
  7. New Member Introductions
    New to the kawasaki world, picked up a bike the other day 2004 ninja 650 er6f. Has a hole in the engine looking to swap. Was wondering what motors are compatible or does it have to be the same year/model?? Thanks in advance
  8. Ninja 650R, ER6
    Hey guys back again. Im trying to install clip ons on my er6f but im having clearance issues in nearly every part. Anyone have any good alternatives like sports bars? I've been looking through old posts but 0 links work anymore.
  9. Ninja 650R, ER6
    Hi guys looking for a rear shock for my 2007 er6f, it’s purely used as a commuter bike so don’t want to spend loads of money on ktech or ohlins etc, is there a rear shock off a different model that would fit and be a small upgrade, z900 or something along those lines, thanks
  10. Ninja 650R, ER6
    Just noticed the end of this tube hanging loose. Anyone knows what it's for?
  11. Ninja 650R, ER6
    Hey everyone, So I was going to ride recently when my bike (ER-6F 2009) did something weird. I shifted from 1st to 2nd and it stalled while riding. After pulling over and trying to restart the bike it only made a ticking noise. Not grinding or anything, just ticking. A few seconds later it...
  12. Ninja 650R, ER6
    Hi guys my ER6F 2012 has been burning oil for about a year now, it seemed to stop after oil changes for about a month or so, but I got a new cyclinder head put on it at the start of the year, valve guides were way off, it stopped burning oil for about 3 months, but has since started it again, it...
  13. 2009-2012 ZX-6R
    Hi guys my ER6F 2012 has been burning oil for about a year now, it seemed to stop after oil changes for about a month or so, but I got a new cyclinder head put on it at the start of the year, valve guides were way off, it stopped burning oil for about 3 months, but has since started it again, it...
  14. Ninja 650R, ER6
    Hi guys I have a 2007 er6f and I’m looking for some front forks, it’s my commuter bike so I’m not looking to spend huge amounts of money modifying it, I can’t seem to find much info on it but I was looking to buy a good set of used forks as I need new stanchions and they are rather expensive, I...
  15. Ninja 650R, ER6
    Hello guys, I been reading a lot of threads on this forum, but never actually went ahead and started a topic. I have owned er6f 2007 for quite some time now and absolutelly love it, except the looks. I do not want to change the bike, but I would like to change how it looks. I want to either go...
  16. Two Wheeled Discussion
    Hi all im looking to swap my stock o6 er 6f speedo to a digital one thats a bit easier to read any one done this before or can reccomend one that fits in the original holder ?
  17. Ninja 650R, ER6
    Hey so I just bought a used 2015 Ninja 650. Been running around a little bit and noticed that the rear brake pedal is bent. Looking for a replacement online. I'm curious whether the ZX6R brake pedal will work because that's what most of my search results are coming up with? As well as the Ninja...
  18. Two Wheeled Discussion
    Anybody turned their 2012-2016 ninja 650 into a stunt machine? Mine is coming along. Got a crazy iron cage on the way but I need something for a subcage. The grom one looks like itll mostly fit if I drill new mounting points but nobody makes them because our rearsets are stupid. Anybody custom...
1-18 of 18 Results
Top