Kawasaki Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Ninja 650R, ER6
    After cleaning and lubing my chain, there’s a slight grinding/scraping noise coming from the sprocket. the whole chain has lube on it but i’m worried because while i fully cleaned one side of the sprocket, i couldn’t fully reach the other side so some gunk may remain. should i add more lube? or...
  2. Ninja 650R, ER6
    Hello everyone, I have a Ninja 650 2022 and iI had a fall about 1 month ago and the alternator cover had a hole in it, so I changed it. First of all, when I felt, the engine cut out and I was able to restart normally to go home (it was about 200m to go). Since then, it hasn't moved and i never...
  3. Two Wheeled Discussion
    Hi All, I need some help on mounting locations on the dash of my Ninja 650, as you know the dash cluster is pretty tight I was wondering if anyone on this forum managed to find or build a mounting option on the dash. i want to avoid mounting on the handle bar if possible. Cheers, Daniel
  4. For Sale - Motorcycles
    For sale is my low mileage 2009 Kawasaki ER6n. It's been a fun and reliable bike since I've owned it. I bought the bike in 2018 with 1200 miles on it from the original owner. It went through a major service: chain, fuel lines, brake lines, all fluids flushed, etc by a kawasaki service shop when...
    $4,250 USD
  5. Ninja 650R, ER6
    Hi, So while driving my 2017 Ninja 650 in a bit of wet weather my check engine light came on and the gear indicator is now just a flashing a line. I can still go through all gears and get it in neutral when stationary or coasting and the bike rides absolutely fine. When in neutral the gear...
  6. Ninja 650R, ER6
    I am about to pull a blown motor out of a 2011 Ninja 650R and will be replacing it with a 2013 Ninja 650r motor. I know the motor will bolt directly in. My question is will the wiring harness from the 2011 work with the 2013 motor. I have a 2013 ECU to go with the 2013 motor with looks identical...
  7. Ninja 650R, ER6
    Hi, so I've got a 2012 650 with 13k miles that I bought used a couple of months ago. It's been riding fine, if a bit warm, until 3 weeks ago when it suddenly started bogging (power/revs lurching down with throttle open?) and surging (power/revs spazzes out between giving power and feeling like...
  8. Ninja 650R, ER6
    Hey all, I'm new here. My brother laid down his 2013 650 and busted up the forks. I'm looking for an affordable set of used ones to replace them. Can anyone give me any pointers on where to look? I appreciate the help!
  9. Ninja 650R, ER6
    hello new member here, im looking for a power commander 3 for a 07 ninja 650 ex, if anyone has one or a place/website I can get one. I've tried dynojet however they do not have pc3 for sale only the 5. Thank you.
  10. Two Wheeled Discussion
    Hi everyone I decided study English through creating video. I'm from Ukraine. May be you can watch and sometimes fix my mistakes. If you not understand me, please ask me below here or on youtube comments.
  11. Ninja 650R, ER6
    So recently I’ve been having problems with starting my bike. Whenever I replaced the stator and rectifier I thought it might be a weak battery. So I went and bought a new battery and replaced the starter relay as well. I get power to the dash and lights and can hear the starter clicking open...
  12. Ninja 650R, ER6
    Hello everyone! I'm a part of a university organization that swapped a 2017 Ninja 650 into a tube frame go cart. We purchased the appropriate harness and ECU to the motor. We've made sure the kickstand sensor, vehicle down, and neutral safety switch have been resolved. Currently we have no...
1-12 of 12 Results
Top