Kawasaki Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 14 Results
  1. KLR & KLX
    Good morning people of the kawiforums community. I have been trying to figure out where to start fixing my turn signal issue, but I don't really know where to begin. The issue is as follows: My turn signals worked one day perfectly, then the next, literally overnight, none of them will come on...
  2. Ninja 650R, ER6
    So I decided to look over my 2009 ER-6N yesterday just to make sure everything is looking good and I discovered that there is a layer of oil present in my coolant reservoir. I actually just had a head gasket blow in my Subaru last week so seeing oil in my coolant here was really not a welcome...
  3. Ninja 650R, ER6
    Hello guys, I have purchased 2007 ER-6F recently. And previous owner broke upper inner fairing on the right side. Wanted to replace it but no luck finding the code in the part catalog to order it. Have you had problem like that? Or do you know what's the code? Attached how it should look on the...
  4. Ninja 650R, ER6
    Hi, Looking for some advice on radiator repair. About a year ago my radiator sprung a leak - I purchased a new one and fitted it all good off we go. Pretty much exactly 1 year later and I've got another hole - not sure about the extent as need to get the guard off (yes I've had 2 holes even...
  5. Ninja 650R, ER6
    Right, one thing or another. I'm having a few issues with my motorcycle. The model is: 2009 ER-6N 649cc, AKA "Naked Ninja" Going on 13000 miles. It started a short while ago. Originally just a grinding/whining noise when engine braking (letting go of the throttle while in gear). It wouldn't...
  6. New Member Introductions
    Hey guys my name is AJ and I am about to join the Kawasaki family as soon as I find the right bike! I know I’m new here but got a critical question. I am considering buying a used ZX6R 2021 3200 miles that shows a solid reddish/orange light on the right side of screen under the oil level...
  7. ZZR600 & ZX-6R Old School
    Bought the bike a month ago and ran fine until it died on me when I was heading home. It has blown white smoke out of the vent while idling, other times I've ridden it after; it will cut off eventually, just slowly dying, usually in 3rd gear. Coolant will be missing too.
  8. ZZR600 & ZX-6R Old School
    I'm looking at this 2005 Kawasaki zzr600 and the guy says he had they shifter bearing replaced and the mechanic said that the main bearing is going out. I don't know what to look up or where exactly that is. any help would be great I really want to get this bike but I want to know what I'm...
  9. Ninja 250R
    I've been messing with this bike for 4 months now, and purchased just about everything I can afford, I'm on my 3 starter solenoid and a new starter removed the KLEEN crap. my battery is at 13.3 volts and 3.2 amps and the brand new solenoid is clicking like a lonely beetle. I'm at my wits end...
  10. 2005-2006 ZX-6R
    I have a 2005 Kawasaki Ninja ZX6R-636 and the bike was stolen from me twice which led to the thief's busting the ignition. I wired it up (with a 100ohm resistor) and I've ridden fine for a year now. A few days ago I rode to the store and when I went to leave the bike wouldn't start, now I'm at...
  11. 2005-2006 ZX-6R
    so one day i go for a ride with my buddy and out of nowhere my bike shuts off as we approach a gas station. i turn it back on after fueling up and it sounds like its running on 2/3 cylinders. so i checked the normal things first. spark fuel and all the goods. replaced a lot of stuff that...
  12. New Member Introductions
    hello, I'm the type of person who bought a 2020 Z650 as my first bike. I actually don't have my license yet so i haven't tried riding her. What I DID DO, however, was purchase some engine crash bars from T-Rex which I just now tried to install. After realizing the bars didn't quite fit before i...
  13. New Member Introductions
    Hi all, I recently bought a bike and the choke lever is broken and it's a pain to get it to move. i can much info online on how to change it out. Do you guys got some info or links? A diagram will work too. Thanks
1-13 of 14 Results
Top