Kawasaki Motorcycle Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. Z750, Z800, Z1000
    Hello, I need help to find a white front fender for my kawasaki. Do you know where I can buy one ?
  2. Z750, Z800, Z1000
    Hey guys, I recently bought a second hand 2013 Z800, when the bike is cold, I brake to a stop, then move off again, for instance at a red traffic light, a single short groan and small jolt comes from down around the front hub/brake area. It stops once the parts are warm, I.e after about 10km...
  3. Z750, Z800, Z1000
    Hi everyone. I have a 2015 Z800 with an issue. The bike was crashed 6 months ago and I have only just been able to begin the rebuild. Nothing was damaged mechanically apart from the exhaust which has been replaced, just plastics. However when we finished some work on it today we noticed that the...
  4. Z750, Z800, Z1000
    I picked up the bike back in December. Didn’t get to ride it much up until now. I get on it and when I hit 8k rpm the bike goes into a limp mode and the check engine light comes on. Not sure what would cause this. Thanks for any suggestions!
  5. Z750, Z800, Z1000
    Hello fellow riders! I am a Z800 owner from Sweden. I may have issues trying to explain my issue but I'll try my best, so please bear with me :) I have been riding my Z800 for two years now and I am getting really comfortable riding it. I been doing everything from longer trips to Swedish...
  6. Z750, Z800, Z1000
    Hello everyone. New to the forum and I am looking for some help. I swapped a Z800 engine into my 03 Vulcan. The build is pretty much finished. I removed the air box and replaced with pod air filters. I also just put breather filters on the crankcase and map vent. Those are the only “mods” to the...
  7. Z750, Z800, Z1000
    Hi all, Sorry if this question has been asked before, I have searched but not found anything. I've got a 2013 Z800, looking at getting a PCV for it. To try to keep the cost down I planned to pick up a second hand one, but obviously I need the correct connection package for my bike. I've been...
1-7 of 8 Results