Search Results for ‘zx6r’

Having the issue of "bogging/sputtering" at around 10,000 RPM, been through it before but I'm doing it on a new bike so I started cleaning the fuel filter/pump. Everything looked fine then I noticed this bend/kink(?) It should be a 09-23 zx6r pump for reference but it just seems odd, shouldn't...

I was wondering if anybody has put boost down on a 19+ ZX6R yet. Im just wondering how many lbs it can handle safely. Ive got a 2021 with 1400 miles. I cant find anything on this forum or facebook, just older models. If anyone can put an entire build thread that would be awesome too. Tia

Hi all, Trying to find aftermarket parts for my 2003 ZZR600 is a right pain! I'm just wondering whether any parts for the 2003 ZX6R will fit the ZZR? Thanks in advance! Ash

Hi all, Trying to find aftermarket parts for my 2003 ZZR600 is a right pain! I'm just wondering whether all parts for the 2003 ZX6R will fit the ZZR? Thanks in advance! Ash

Guys I bought a brandnew 636 from 2020 yesterday but I've got a problem. I'm riding motorcycles for 5 years and It's my first motorcycle with GP shifting setup. Is it possible to take it off or get him back to normall ? It's disgusting as h.

Gday guys, quick introduction I’ve got a buggy with a ZX6R in it that I’m just experiencing starting issues. When I crank it it just seems to be flooding the plugs, I get spark and it back fires if I put fuel down the carbs but won’t run. It’s hasn’t got a fuel pump or airbox. I bought the...

I bought my 2007 zx6r already lowered when I rode two up with my wife it drags I took a picture of the lowering links are these adjustable can I simply adjust the height??

I'm going to go into a little back story about the bike first so that when I present the issue in this thread, people understand what it can't be. I bought a 2008 zx-6r in June and the bike seemed to ride very nice. I wanted to change the color of the bike and make some minor upgrades to it. So...

Mods: Slip On RS-5 Yoshi - Power Commander 3 - K&N Air Filter - Quantum Hi-Flo Fuel Pump - May Have Aftermarket Throttle Body's They Say Keihin Or Somethin I did a valve job ,spark plugs ,air filter , oil change, whole works on my zx6r because it was due bike has 36,000km but it still has no...

Hey guys, So my bike was recently rear ended at low speed (<5mph), I was at a stoplight and when it turned green the dipweed behind me "lost control" of his manual vehicle and drove into the back of my bike. At first damaged seemed to be minimal; bent my license bracket, noticed a crack/hole on...

So I have an 07 Zx6r right, I bought it from a guy who said it needed throttle bodies to run right. Right when you start the bike and give it any gas it dies. Idles and runs well but any gas at all and it chokes. So I went and replaced the spark plugs, throttle bodies, put new gas in it, started...

Permission to post admins. Hello. Planning on getting ang new Shock for my ride. But I don't know what the length is. Particularly eye to eye. Can anyone help me? Thank you so much all. Ride safe, stay safe.

Permission to post admins! Hello. I did a climb last Wednesday, 28th of April, 2021. And I noticed my ZZR600 E5 was on a hard time getting past 9k RPM on the 2nd to 6th gears. And it feels like getting chocked or something, it's running but it's like something was stopping it to climb higher...

Permission to post admins! Hello. I am planning to buy a repair kit for my ZZR600. I locally found new kits for ZZR600G and J, and ZZR600 2005. And also new kits for ZZR400 1990-2004 Is this compatible for my ZZR600? Your suggestions are truly appreciated. Because the kawasaki local factory...

Background: -180cm (5'11)/70kg (154lbs)/33 y.o. -3 years of riding on a ZZR400 1993 (217kg/65Hp) -2 years break. -Currently taking safety riding lessons in preparation and thinking of buying a used bike. Riding style: -On weekends, street riding/touring/twisties. -Can do basic maintenance...

So I had to replace my oilpump/ waterpump assembly but after I did this when I tighten the waterpump impeller bolt to the recommended torque the impeller tightens against the housing to where it doesn't spin at all. Please help

Hello everyone, I just put a 600cc ZX6R engine in a quad frame. I am trying to figure out why I have no spark. I used the stock Key from the quad and wired it to the wiring harness from the bike, I also used a resistor but I still have no spark. I believe I have all the grounds correct, does...

I’m pretty sure it will fit but I don’t have the time to quite research it between work, school, and my business but I was wondering would a 2007 zx6r motor fit into a 2005 zx6r frame?

Hey so I just got my scrapyard fighter zx6r and trying to look for the shift lever/bracket since mine is cleanly broken off. Is their a new Model zx6r that can fit it or Do I have to search a few kore times for this bracket and shifter