Kawasaki Motorcycle Forums banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
527 Posts
Discussion Starter · #1 ·
I've been working on a DIY integrated tail for my 06 in my spare time (which isn't much)...I will post a complete guide in the How To section when I am done with it...

GunRunner
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #3 ·
There is a DIY for the 03-04s, but not 05-06...they do not use a PCB like the older ones, but a buss bar system instead...

GunRunner
 

·
Registered
Joined
·
763 Posts
how did you get the tail light apart? i looked at the stock one, and even with a heat gun it didnt look easy at all to get it apart. It just wanted to warp/melt the plastic. Its really bonded on there good.
 

·
Registered
Joined
·
527 Posts
Discussion Starter · #5 ·
I used a dremel, a sawzall blade, and lots of time...you just have be be real carefull with it, especailly with the dremel, it will melt very quickly...the sawzall blade offers more control...

GunRunner
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top