2001 ZX6R Undertail

1 - 1 of 1 Posts

Howsie84

Registered

Joined 2 months ago

2 Posts

Discussion Starter • #1 • 2 months ago

Hey guys,

Hope your all well? Just a quick one, have any of you fitted a undertail to your 98-01 zx6r so then you can fit a tail tidy? ive been looking all over the interweb but cant really find much? Any help would be much appreciated :grin2:

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Vent tube

ZX-6R All Model Years

Have a kawasaki mule 2010 leaking fuel out the vent tube on carb. Anyone got a answers to my problem, thanks Steve
- 1
- 127
- Steve46r · updated 10 days ago
06 636 Brake Light Connector

ZX-6R All Model Years

I picked up an 06 636 that was in a crash and the brake light connector got ripped off of the wiring harness. Been trying to find a used piece off of a damaged harness someone may have but that's proving tough. Anyone know where I can get this type of connector? Thanks.
- 2
- 137
- Pjed · updated 21 days ago
2004 zx6r Won't Start

ZX-6R All Model Years

Bought the bike, 2004 zx6r, was riding it home and it was running great. After about 50-60 miles it acted like it was running out of gas and finally died. I haven't been able to get it started back. Need help!
- 1
- 146
- donnieyoung1976 · updated 26 days ago
Old ignition need to hotwire I cut it away from ignition stripped the wires what colors need to be connected?

ZX-6R All Model Years

What colors need to be connected to hotwire my 96 zx6
- 0
- 142
- Ron fallon · updated 1 month ago
2018 zx6r stalling no solution

ZX-6R All Model Years

So my 2018 zx6r has been stalling since I got it Oct. 2018. It only happens in the first 10 minutes of riding. Engine is warm all maintince is up uptodate all fluids are good. It stalls when I pull the clutch and coast so she splitting lanes or coasting to an off ramp. Ive taken it to be...
- 1
- 798
- N
  Ninja-wolf-3 · updated 2 months ago