Kawasaki Motorcycle Forums banner
1 - 2 of 2 Posts

· Registered
235 Posts
Discussion Starter · #1 ·
Recently having to bleed the master cyl before each ride. When I do, it's fine for that ride, but after sitting a few days it needs to be bled again, gets spongy. So I'm going to replace it. I don't necessarily have any issue with replacing it with the same OEM part (have CRG levers), but if you guys have any suggestions for an OEM type upgrade, say from a zx10, etc, last have it.
1 - 2 of 2 Posts