Joined
·
2 Posts
I’m trying to do a front reflector delete on my 17’ 650. Anybody know the bolt size so I can replace the long one that’s in there? Or does anyone have an alternative white/silver reflector?
2017 650 front reflector delete/removal
1 - 2 of 2 Posts
Joined
·
1,996 Posts
Just take the bolt with you to Home Depot or Lowe's and compare it to the metric bolts they have. They usually have a sizing board you can screw the bolt into to find the proper thread pattern/size. You should be able to find it without any problem.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
ER6F vibration
Ninja 650R, ER6Hi, hoping to find some help. My 2010 ER6F has developed a really annoying vibration. I know these are viby bikes but this is a new vibration. I dont tend to notice the normal vibrations but this goes through the whole bike, including foot pegs and handlebars. Its quite a high frequency and...- 3
- 90
-
Riley10 · updated
-
Cant find part
Ninja 650R, ER6My chain fell off and oil started spraying everywhere so I checked in a phone a broken part 0 0 4 6-2 but I can't find the part online has anyone know where you can get one- 2
- 68
-
Eviseratorkyle · updated
-
My trip to Bulgaria and Romania - part two
Ninja 650R, ER6After the creepy turn that our way of life took last spring, the last months were stressful to say the least, with the daily bombardment of bad news and of course the lockdown limitations that kept us confined inside four walls. All this time I was dreaming of motorcycle trips and at last I saw...- 44
- 2K
-
GR rider · updated
-
2013 Kawasaki 650 coolant in oil??
Ninja 650R, ER6Hi everyone I picked up a 2013 650ABS model with 4,700 miles on it from an auction (probably my first mistake) Got it home and did an oil change then took it down the road maybe a mile and back. Noticed the oil was milky looking. Changed the oil again to see what was up and while draining it I...- 15
- 419
-
Ninja 650r 2009
Ninja 650R, ER6I have a ninja 650r 2009 I installed a new clutch , clutch cable and hub clutch and the clutch still won’t engage it will work after it is adjusted and then I’ll lose all power to the clutch lever. I can fully release the lever and the bike won’t go anywhere. What do you guys think the issue is?- 0
- 71
-
Colb93 · updated
Join now to ask and comment!