Kawasaki Motorcycle Forums banner

Aftermarket List for 03/04 ZX6R

Jump to Latest Follow
1 - 20 of 297 Posts
T

·
Registered
Joined
·
1,230 Posts
Discussion Starter · #1 ·
Safety First:
Freeway Blaster Horn

It is a 12 volt horn made by Signal tone. Available at Pepboys and most other autoparts stores. It is 132dBs. That's 25dBs over stock. It uses the existing '03's horn bracket and wiring connectors. Absolutely no modification is required. Make sure to get the low note version. Model # F. Here is a picture:
 
T

·
Registered
Joined
·
1,230 Posts
Discussion Starter · #2 ·
Replacement Headlights:

These are brighter then stock and have an H.I.D look to them.
The 2003 bulb type for our bike is 55 Watt H7 type.
Here is a pair made buy MTEC. I put them in and they are the perfect color (4350K) bright white with a tint of blue in them. Looks just like HID lighting. The MTEC ones I purchased are great quality and LOW LOW price. I got a set of 2 bulbs for only $18. Also, it's tempting but don't go any more blue than (5000K) otherwise you'll get pulled over and you wont be able to see good in rain (or SNOW, for all you northern folks!) I am very happy with my MTEC bulbs.
I got mine on eBay. Here is a link to all MTEC bulbs on eBay. They range from $18-25.
http://search.ebay.com/search/searc...t&ht=1&SortProperty=MetaEndSort&query=MTEC+H7
Make sure to get the ones that say "55watt consumption=100watt light output". These aftermarket lights stand out on the road, which is exactly what we want.
 
T

·
Registered
Joined
·
1,230 Posts
Discussion Starter · #3 ·
After-market Windscreens:

Sportech makes chrome windscreens for our 03's. They come in chrome, black chrome, red chrome, and blue chrome. They are distributed by partsunlimited and retail for $79.95. They are available through your local dealer and some online sites. Here is a link to there site and a picture of the chrome windscreen. They are not available until June 2nd.
http://www.sportechinc.com/bike/kawasaki.html


Zerogravity also has the double bubble and standard for our '03's available in clear and tinted only.
http://www.zerogravity-racing.com/sportbikes/kawasaki_sptbks/245.htm
http://www.motodepot.com/street/body/zerogravity/zerogravity.html
 
T

·
Registered
Joined
·
1,230 Posts
Discussion Starter · #4 ·
Aftermarket seat:

Here is a Corbin seat available now for the '03 ZX6R/RR. For those of you who don't know what a cobin seat is: Its a seat that looks pretty much stock but has cushier padding, helps make the drastic slope down on the 03 by raising up the front of the seat just enough to stop your balls from getting crushed, and it widens out the spot where you but cheeks would go. All and all if gives you a much more comfortable riding position and allows you to ride longer while being more comfortable. It doesn't take away from stock aggressive look though. But reviews have said that you do feel more vibrations of the bike through the corbin seat more so then with the stock seat. Heres their link. Seat runs $230 and is available '85-'03
http://corbin.com/kawasaki/2003zx6r.shtml
 
T

·
Registered
Joined
·
1,230 Posts
Discussion Starter · #5 ·
Changing the Color of your Stock Gauge Cluster:

Change that stock dull orangey yellow color to a new bright color.
This is a service not a part to buy. You can get the LED's in your gauges changed to just about any color or colors you'd like. Available colors are Blue, Green, Red, Purple, Orange, and white.
You ship them your gauges and then they ship it back to you in just a couple of days. The cost is $55-$70 depending on color + free shipping.
To get the gauge cluster out: remove the windscreen and mirrors, then take out 4 bolts holding the gauge holder to the airbox, then unscrew 3 screws out from behind the gauge. You can still use your bike when the gauges are out. Here is a picture and the link to their site.
http://bluegauges.com/prod_kawasaki_gauges.htm
 
T

·
Registered
Joined
·
1,230 Posts
Discussion Starter · #7 ·
Steering Damper:

Most people prefer top mount, So here they are:
2003 scotts will run about$450 from their site here:
http://www.scottsperformance.com/dampacc-form.php?Type=road

This is the lowest price I could find, $400. Here is their link:
http://www.hardracing.com/Shocks & Steering Damp/Scotts.htm


and Ohlins top mount gas strut $477
http://www.hardracing.com/Shocks & Steering Damp/OhlinsPricing.htm

Ohlins and Harris also makes a limt. model for our 03's. It is Champaign and silver. harris also makes the gold line series which will match our bikes. Its about $100 extra. Here is a pick of the gold line series form Harris. comes with Gold colored brackets also.
 
T

·
Registered
Joined
·
1,230 Posts
Discussion Starter · #9 ·
R

·
Registered
Joined
·
206 Posts
#18 ·
www.woodcraft-cfm.com
In case someone wants more room in the cockpit of the 636R/6RR, Woodcraft clipons weigh much less than stock bars, move the bars about an inch forward and have replaceable handlebars:




Using these clipons requires the brake reservoir to be mounted in a different location, here's the bracket I made:




Gary Milcheck
'03 Kawi ZX636R
'00 Duc 748R
 
1 - 20 of 297 Posts
About this Discussion
296 Replies
161 Participants
Last post:
JayDog
Kawasaki Motorcycle Forums
A forum community dedicated to all Kawasaki motorcycles including the ZX-6R, KLR 650, Ninja 250, Ninja 250R, and Vulcan. Come join the discussion about performance, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Two Wheeled Discussion 2003-2004 ZX-6R New Member Introductions Ninja 250R 2007-2008 ZX-6R
Recommended Communities
Community avatar for Kawasaki Ninja ZX Forum
Kawasaki Ninja ZX Forum
64K+ members
Community avatar for Honda TRX 450R
Honda TRX 450R
54K+ members
Community avatar for Harley Davidson Pan America Forum
Harley Davidson Pan America Forum
NEW!
300+ members
Top