Kawasaki Motorcycle Forums banner

Any one have this problem before?

1321 Views 7 Replies 6 Participants Last post by  linm
I got a 1998 Ninja ZX-6R back in November. The thing runs great. I changed the spark plugs, cleaned the air filter, I had a stuck float and I changed the oil every three thousand miles. It runs better now than when I first got it cause it sat for almost a year. My problem is that in the past three months the bike will just flat out stall when I pull the clutch in. It does this either when I am up shifting, down shifting, or any gear for that matter. My Ninja just doesn't care. It fires right back up when I push the starter button and it runs flawless. Is this a common thing with the 1998 NInja or something else wrong. Obviously it ain't nothing major. It just annoys me. I would appreiate it if someone responded. I posted this on another sight and got nothing back. I ain't making this up.
One more thing I have a Yosh RS-3 slip on. It ain't jetted. When I changed the plugs the old ones were the right color.

Thanks,
Matt
Here's my ten cents. My two cents is free.
Status
Not open for further replies.
1 - 1 of 8 Posts
i have that exact problem. i have a 00 6r. i only have the problem when the bike is first warming up, i.e. it will only happen just after i let it choke and ride it for the first few blocks. it only stalls when i pull the clutch in like when i'm coming to a stop light, but then it will fire right back up. i adjusted the idle speed so that it runs at about 1600 rpm, which is up from 1200-1300. i've only ridden it once like this, but i didn't have the problem. keep me posted on any changes you make and i'll do the same.

chasen

You keep campaining for that ass-whooping you might get elected
1 - 1 of 8 Posts
Status
Not open for further replies.
Top