Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 20 of 23 Posts

·
Registered
Joined
·
520 Posts
Haha yeah I've see that before also.
I would use a better design than that if I were to go turbo.
 

·
Registered
Joined
·
394 Posts
Its funny how them Turbo's are mounted on the Honda's. And they are probably still underpowered
 

·
Registered
Joined
·
1,583 Posts
Its a good way to mount the turbo. I have seen this done on car as well (the turbo where the muffler goes) and the kits work very well. I sent the company an e-mail about what kind of power they are making with there turbo kit on a 636. I will post up here with what they say.[8D]
 

·
Registered
Joined
·
442 Posts
the dyno #s on the r6 say 95 to 101 HP?
 

·
Registered
Joined
·
1,583 Posts
This is what they said:

The 636 on 6 psi boost gains a around 60 hp and 45 lbs. torque.
Shandy Turbos

This was their responce to my e-mail:D
 

·
Registered
Joined
·
692 Posts
Originally posted by Cargo
This is what they said:

The 636 on 6 psi boost gains a around 60 hp and 45 lbs. torque.
Shandy Turbos

This was their responce to my e-mail:D

ask em how long the motor lasts ;)
 

·
Registered
Joined
·
157 Posts
Dude, it comes with a cold air intake! Hope the kit is better than their spelling!

"Custom Headder"
"This is a compleat turbo kit ready to ride!"
"CUSTOMER IS RESPONSIABLE FOR COST OF SHIPPING BIKE!"
"Methonal / Watter injection kit..."

Sorry, just had to point that out, not knocking their kit or anything.
 

·
Registered
Joined
·
692 Posts
Originally posted by dj636
Dude, it comes with a cold air intake! Hope the kit is better than their spelling!

"Custom Headder"
"This is a compleat turbo kit ready to ride!"
"CUSTOMER IS RESPONSIABLE FOR COST OF SHIPPING BIKE!"
"Methonal / Watter injection kit..."

Sorry, just had to point that out, not knocking their kit or anything.
Yeh I noticed that, im gonna buy em a "hooked on phonics" kit b 4 I let em install a turbo on my bike :D
 

·
Registered
Joined
·
442 Posts
haha... wow i would like 60 hp and 45 ft lb but would that be take away all low-mid range?
 

·
Registered
Joined
·
1,660 Posts
that down pipe is ugly!!! i cant believe the didn't route that differently. i like the wastegate dump and turbine outlet pipes on that r6, man 60hp would be so nice...
 

·
Registered
Joined
·
442 Posts
very good point...by spending 2,500 on that turbo you get what what a zx10r gets but your engine is screwed up
 

·
Registered
Joined
·
1,462 Posts
the frame cant take it captain the zx6r cant hold the 60hp much longer :D get a zx10r and it still be faster than a turbo 636 lol becuase it will be reliable as well as will not look like a freak of bike nature[:p]
 

·
Neutered
2006 MV Agusta F4 1000S
Joined
·
8,495 Posts
Originally posted by alor14582
get a zx10r and it still be faster than a turbo 636 lol
Technically, a 636 with 170hp (+60 at 6 lbs) will accelerate MUCH faster than a 1000 with 165hp, simply because of the gearing. There's no way a liter bike could compete unless you gave it the short ass ratio of a 600. But I think it'd be a terrible idea. Try keeping the front end down on a turbo 600 with 170 WHP...just try. I'd like to see that. lol
 

·
Registered
Joined
·
1,462 Posts
that bike will be in the shop every month or so[:p] but you are right about the gear though
 
1 - 20 of 23 Posts
Status
Not open for further replies.
Top