Kawasaki Motorcycle Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
139 Posts
Discussion Starter · #1 · (Edited)
i ordered some zx6r fork inner tubes or stanchions and have been sent some from an earlier model that are roughly 603 mm long and i was expecting some 573 mm long.
they have a circlip at the bottom too which i cant remember seeing when i stripped mine but i suppose if removed it wont cause any probs.
so what do i do, send them back or can i easily adapt them by simply inserting 30mm spacer above the spring or will the damping be screwed up also?
i have waited 3 weeks for these to be arrive.
cheers
al
well i sent them back and they will cover the postage. was almost looking forward to bodging it
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top