Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
what's up...well i guess i thank my dad for this but he gently placed my 636 on the ground and he broke the end of the peg on the side for the rear brake

anyways i thought i should ask before i screw up but how do you change the peg???

any help would be appreciated
thanks in advance!

G2
 

·
Registered
Joined
·
18 Posts
well actually the peg just broke in half ...i still have that little ball thing that sits on the bottom of the peg...i already got a replacement peg and i just need to move the little ball thing to the new one and slap on the new peg
 

·
Registered
Joined
·
150 Posts
dude, i got a set of angle cut pegs for a 97 zx7r and i grinded a slight amount off one side to get it to go in far enough to get the pin through, they are much nicer then the stock pegs. My boots used to slip off the stock pegs and these new ones are slightly longer and grippyer.
 

·
Registered
Joined
·
18 Posts
well to be honest i have no problems with the OEM peg so i'd rather just change it to the OEM peg considering i already have the peg sitting around
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top