Kawasaki Motorcycle Forums banner

Delkevic Exhaust Install and Review, Ninja 650

4778 Views 5 Replies 3 Participants Last post by  mtncrvr
After having a lot of people asking about cheaper exhausts, I decided to try something other than a Yoshimura on this project bike, and went with the 8" Delkevic Carbon Full System. While it's defintely not as high quality, it's not a bad system overall. All the fitment was spot on, all pieces were included, along with new exhaust gaskets. The one thing I will forewarn about, is the Bazzaz AFM shows the bike running extremely lean under certain conditions at stock fueling, unlike the Yoshimura Alpha that I run on the Z650. So, if you ever consider installing this cheaper system, you best intend on putting forth the extra money for a fuel controller, or you could possibly regret it in the long run. I'll post up a video in the coming week of adjusting all the fuel settings, where it started, and where it's at now for AFR's, but until then, here is a fairly detailed install video of the system on this 2009 Ninja 650.

https://youtu.be/uecj1HyFGsw

Ride safe gang!
  • Like
Reactions: 1
1 - 1 of 6 Posts
1 - 1 of 6 Posts
Top