Did you install your Scorpio alarm yourself?
1 - 3 of 3 Posts
Scorpio installation
I installed mine last weekend. Didn't take long. Couple of things to pay attention to - make sure the LCD unit is fully charged before you do the installation and the rear lite connector hooks into the license plate lite not the tail light. the other two connectors on the factory harness ( I bought the factory harness option so I didn't have to cut wires or splice) go to the turn signals, pretty obvious. I mounted RFID and the controller inside the black plastic area where the daily check list is pasted. It fired right when I plugged the harness into the controller unit.
Have fun!
I installed mine last weekend. Didn't take long. Couple of things to pay attention to - make sure the LCD unit is fully charged before you do the installation and the rear lite connector hooks into the license plate lite not the tail light. the other two connectors on the factory harness ( I bought the factory harness option so I didn't have to cut wires or splice) go to the turn signals, pretty obvious. I mounted RFID and the controller inside the black plastic area where the daily check list is pasted. It fired right when I plugged the harness into the controller unit.
Have fun!
Thanks upmike, I imagine with the optional wiring harness it's not a difficult install.
I think I'll give it a try myself
I think I'll give it a try myself
1 - 3 of 3 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Join the discussion
Kawasaki Motorcycle Forums
A forum community dedicated to all Kawasaki motorcycles including the ZX-6R, KLR 650, Ninja 250, Ninja 250R, and Vulcan. Come join the discussion about performance, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
Join now to ask and comment!