Kawasaki Motorcycle Forums banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
All help and info needed please

1st- I have a 1995 zx6r

problem- Before i brought it in to get jetted and a hindle high moutn exhaust, if the bike wasn't warmed up for like 10-15 minutes prior to riding it would go about 200 feet in 1st gear and then bog down and eventually cut off. I figured this was a jetting problem and just to have the carbs cleaned.

--i just got the bike back today, they say they put a new fuel filter, new plugs, factory stage 1 jet kit, cleaned the carbs, hinde full high mount exhaust.

--still has the same problem but feels a little worst, lets me hit about 5,000 rpm in first or second won't go any higher, then eventually bogs down and shuts off

--Any suggestions or info, Please Let me know
 

·
Registered
Joined
·
13 Posts
Discussion Starter · #3 ·
you know what that seemed to help, what do you mean by the fuel cap being clogged?

what can i do to fix this??
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top