Kawasaki Motorcycle Forums banner
1 - 10 of 10 Posts

· Premium Member
Joined
·
903 Posts
Discussion Starter · #1 ·
the wire that you have to tap into is the yellow with 2 black strips ---l--l----

the 09-10 map will work from dynojet and will run like a rape ape but the downside is that i was only getting about 28MPG and that is with the autotune gaslight coming on before 105 miles

so you will need a dyno tune map to get the gas mpg back

update hopefully i will be getting a green 09 leftover for 7800 OTD by next week jest waiting for the insurance to give me the check
 

· Registered
Joined
·
179 Posts
forgive me if this is wrong my memory is terrible but isn't that the same wire you have to tap into for installing the pcIII?
 

· Registered
Joined
·
1,099 Posts
So the PCV instal just the same as a PCIII? I know this is dredging up an old thread but whatever.
it is the same but the color of the wire you tap into for the throttle position sensor is different in the 07-08 and 09/10 model. The first post gives you the color code for the tps wire to tap into. Also make sure you tap into the tps for the main throttle bodies not the secondary.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top