Kawasaki Motorcycle Forums banner
1 - 1 of 6 Posts

· Registered
410 Posts
The new seal can be made to fit easily by stamping it using a PVC pipe that's just a hair wider than the tubes. I'm sorry I don't remember what size but go to home depot and buy a few for $2 each. On a different note, there is a proper procedure to get the oil level correct. Also, you need a special tool that holds the tubes while you unbolt the top, which is tighter than an asi......
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.