[GreenEnvy]

If you can find a good place you could staighten it, but its tricky and would most likely cost a ton..

A new frame is no small bit of money either, but I'd feel better on a frame I know is straight..


-=Welcome To Canada=-

2002 Green 6R
1986 Gixxer 7/11

 

[minytrker]

If it were my bike I wouldnt ride on the frame if it was bent back. The frames on the 6r are kinda weak in the front anyway. The frames tend to crack if you wreck. I cracked a frame from just doing endo's and wheelies, the bike was never wrecked at all. Here in SC they would total your bike out if it needed a new frame.

2002 954RR
2001 ZX6R (stunt bike)

http://home.sc.rr.com/minytrker/bike.htm

 

[cheetahflyer]

i had an accident wiht my new 02 zx6r and my neck of my frame got bent. i either need to have it straightened or get a new frame. any suggestions?

thanx for any help
DL

 

[spartan 116]

definitely get a new frame. if you try get it straightened it costs you a lot of money and then the frame is still prone to stress cracks from the straightening. aluminum doesn't like to be bent alot[B)]

give me fuel give me fire give me that which i desire

 

[cheetahflyer]

anybody know where i can get a cheap frame beside a salavge yard and ronayers.com

i am limited on flow and need some help

thanx
DL

 

[minytrker]

What kind of prices are you getting? Are you looking for just a frame, or a frame and title?

2002 954RR
2001 ZX6R (stunt bike)

http://home.sc.rr.com/minytrker/bike.htm

 

[GreenEnvy]

Found one from an 01, which is the same as 02..

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34284&item=2415745095


-=Welcome To Canada=-

2002 Green 6R
1986 Gixxer 7/11

 

[Rob Lee]

You can also let GMD Computrack in Fort Lauderdale measure and correct the frame misalignment. Check them out at gmdcomputrack.com.