Kawasaki Motorcycle Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1,606 Posts
Discussion Starter · #1 ·
Yep, you will need a torque wrench at least to replace the fork tubes in the triple clamps. Make sure you take the caps off the fork tubes before you loosen the triple clamps. You will also need to make a tool to measure the oil level and one to work the rod in the middle of fork tube. A cut up coat hanger will do for both.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top