Kawasaki Motorcycle Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
I BOUGHT A MICRON HIGH MOUNT FOR MY 636. WHEN I REMOVED THE FACTORY PIPE FROM THE BIKE I DID NOT SEE A GASKET. WHEN I PUT THE NEW PIPE ON THERE WAS A LOT OF GAP THAT NEEDED TO BE CLOSED UP WITH THE CLAMP. WHEN I TIGHTENED THE CLAMP COMPLETELY THE PIPE WAS NOT TIGHT TO THE BIKES PIPE. SO I CALLED MICRON TECH SUPPORT, AND TOLD THE GUY (BRUCE) MY PROBLEM. HE SAID THAT THERE IS A GASKET THAT SHOULD HAVE STAYED ON THE END OF THE BIKES PIPE WHEN I SLID THE FACTORY ONE OFF. BUT THERE WASN'T. WHEN I FEEL WITH MY FINGER ON THE INNER PART OF THE END OF THE FACTORY PIPE,,,I CAN FEEL A LIP, BUT IT SURE AS HELL DOESN'T LLOK LIKE A GASKET OR ANYTHING!

WAS WONDERING IF ANY ONE ELSE WHO HAS REMOVED THERE PIPE FROM A 2003 636 SEEN A GASKET ON THEIRS?

IF ANYONE HAS ANY OTHER RECOMMENDATIONS ON HOW TO FIX THIS MINOR PROBLEM,,,LET ME KNOW PLEASE.:)
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top