Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
295 Posts
Discussion Starter #1
Just installed my Gen Mars. What a big difference.
Does anyone else have them installed?
If so, did you slip your fork up to the top of the clip on? or leave
the space?


I'm going to live forever; so far so good
 

·
Registered
Joined
·
223 Posts
I just left the space. They sent you caps for the tops right? I was afraid it might alter my handling characteristics so I left it alone.
 

·
Registered
Joined
·
349 Posts
So the Gen Mar made your handles up higher? I put in a set of Vortex racing clip-ons. It LOWERED the ride position by quite a bit.

Depends what ya want. As long as you have enough clearance (wheel/front fork bottoming out), you can lower the fork down or put them all the way up to the top of the clip-on.

Do the Gen Mars attach to the fork like the stock clip-ons? I've compressed/lowered my front a mite for my application. Shrug.

What sort of handling/ride do you want?

'00 ZX6R silver
 

·
Registered
Joined
·
3,728 Posts
What year bike you have Bat girl? How far did it raise the bars?


I wanted Gen Mar but they would work on my 02 ZX-6R becasue of the way the change in the triple clamp....my holders are under the clamp...


I went with 2 brother V3-Risers....raised my bars about 3/4 inch, I could go alittle higher but I'm running into clearence issues at full lock with the faring stays....

My Drinking Team Has a Racing Problem!
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top