Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter #1
Well, got the new Pazzo levers and can't get them to go on, well the brake lever actually. I took the bolt out and the old lever came right off, but now I can't get the new one to go on? The little plunger thing, or what ever it is will not push back in?! Am I a dork for not being able to figure this out? (yes....)
Thanks for your help,
Shawn
 

·
Registered
Joined
·
1,726 Posts
Try putting the stock one back on, then slowly disassemble it and put on the new lever.

Mine took me < 30 minutes to lube and istall.

And dont forget the little pin goes inside the small hole in the lever, and it pivots slightly.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top