Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
76 Posts
Discussion Starter #1
how the hell do you remove the front wheel? I need to balance my front wheel because I removed my weights to polish my rims and like a dump ass, forgot to mark the spot where I removed them from. The tool pouch doesn't have the piece to remove the front wheel. I need the size of the hex key and the "how to" remove the front wheel. Thanks.
'03 636
 

·
Registered
Joined
·
354 Posts
loosen pinch bolts...axe threads out with a spark plug socket....I am not sure if it is the big plug socket or the small one...anys ways just look at a spark plug socket you will know what to do...
 

·
Registered
Joined
·
1,471 Posts
To remove the front wheel,
  • Loosen the right side axle clamp bolts, and then the axle
  • Raise the front wheel of the ground
  • Pull out the axle to the right and drop the front wheel out of the forks
The front axle takes a 22 mm hex bit socket. In a pinch, you can use a Craftsman spark plug socket. Check out this thread.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top