Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
999 Posts
I have a crash cage which took the all of the fall, it broke a bolt and bent a bolt on it but saved the frame, cases, and rear sets from braking. I only have a little 4-6 inch scratch on the front left fairing around where the blinker would be. I will take some pics, but it will be next weekend beore I can take them.

2002 954RR
2001 ZX6R (stunt bike)

http://home.sc.rr.com/minytrker/bike.htm
 

·
Registered
Joined
·
86 Posts
Way to go! It's all down hill from here on out. 12's are so hard until you get them they once you get them you will wonder what was so hard. Are you running a freestyle ingenuity cage?
 

·
Registered
Joined
·
999 Posts
Yeah the cage is from them. Its pretty good, the only draw backs are you have to relocate the overflow bottle and you have to cut holes in your fairings. I just got rid of the overflow bottle all together. When your doing 12's do you have your bike idled up? I couldnt get them until I idled the bike up pretty high,(have no gauges so dont know rpm) and would clutch it up and then because of the idle I was just using the rear brake only.

2002 954RR
2001 ZX6R (stunt bike)

http://home.sc.rr.com/minytrker/bike.htm
 

·
Registered
Joined
·
86 Posts
I have extended sliders that I had to move the overflow too. I actually just cut up my left fairing a little and slid it forward. I can stil 12 fine with the idle low but its a lot smoother with my idle up. For no throttle hand I have it at about 6000.
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top