Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
86 Posts
Discussion Starter #1
Hello all just wanted to know everyones opinions and reviews on JEtkits. I currently have a Yosh Highrise with a K&N and it seemed after i put the yosh on(from a micron) it had a huge flatspot? And ive been told by a few people jets will will make it run alot harder. Can anyone back this up or tell me what i should do?
 

·
Registered
Joined
·
2,223 Posts
get a factory pro kit or an ivans kit. both use factory mikuni jets which are by far the highest quality. i put a full akropovic system on my bike and a factory pro kit and my bike pulls really hard now, very easy to get the front wheel to come up. www.indysuperbikes.com has good prices for the factory pro kit.
 

·
Registered
Joined
·
823 Posts
[:Agree]
My experience with the Dynojet kit was unsatisfactory. Never could get it dialed in with a Yosh slip-on. I ended removing all the DJ stuff and just shimmed the needles 0.5mm and set the idle mixture screws to 2 turns out. Ivan's or Factory Pro would be the way to go IF you have a full system + K&N. IMHO jet kits are overkill if you just have a slip-on. Good luck!
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top