Kawasaki Motorcycle Forums banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Hi all, just done refurbishing my 1997 KLF220A. However turns out it won't start, the issue is there is no spark.
We have bought a new spark ignition coil and cable. No spark
Traced all wires through CDI etc. No spark

However the one electrical thing I replaced was the ignition switch (ie: Key switch)
The old one had 3 wires plugged in but the power worked when I only connected 2 or the 4 wires the new one came with...
Issue is I labelled up the old wires for the old ignition switch but it has gone walkabout...

Could anybody help us? This has been bugging us for 2 days now 😭

Cheers, Dan
1 - 1 of 1 Posts