Kawasaki Motorcycle Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Hey guys I have an 06 636 I rode all day on saturday. I went to put the bike away and it tipped over but not hard I caught the blunt of it in my shed. I went to start it sunday. The gauges came on fuel primed when I pressed the starter it was just about to turn over and start up and everything shutoff!! My battery is good 14volts. I checked all my fuses. My buddy and I are electrical troubleshooters on elevators. We checked the ignition switch. We lose the voltage from the battery back towards the relay assembly/fuse box. We jumped a piece of wire from the battery to the ignition and everything turns on gauges, fuel primes, bike tries to turn over so starter motor is good but I get an Fi light. Any help will be greatly appreciated. Hope someone had similiar issue
 

·
Registered
Joined
·
2 Posts
I'm following this post as I'm having a very similar issue though I never thought of jumping a wire to the fuse box like I've read of people here doing, did you jump it to the ignition fuse or to the ignition wire?
 
1 - 2 of 2 Posts
Top