Kawasaki Motorcycle Forums banner

1 - 20 of 71 Posts

·
MODERATOR
Joined
·
28,939 Posts
Discussion Starter #1 (Edited)

·
fap-o-caster
Joined
·
50,488 Posts
Here is Tweakmon's map, the one that I run- click the link in his quoted post to download the map file

Some of you have asked to try my new custom map file.

It gained me 6 HP instantly. It is for the 2005-6 ZX6R with an Akrapovic slip-on and a high flow air filter.

Click the link below to download it:

http://www.tweakmonster.com/miscstuff/zx6r/2005ZX6R_Akra_KN_dyno.zip

enjoy! :D
While I used his map, this is MY dyno sheet with the following:

his map
akra slip on
K&N air filter
jumper mod

 

·
Registered
Joined
·
201 Posts
Thank you!
 

·
Registered
Joined
·
1,488 Posts
I have a map that I got from here a while ago I've been using, its for 07 6r, with
Akra full evo,
bmc race, and some other mods.. As someone overseas posted this, I don't have their dyno, or their elevation.. If you want it PM me--

Just found my map, for those who've been interested I'm going to upload it here : The one titled Fuel Moto is the map I use, there is another one on there, I forgot where I got it from, but it says Leo Vince, perhaps the PC3 site.. Enjoy ;)!
 

Attachments

·
Registered
Joined
·
885 Posts
2007 ZX6R

Akra full
Block off plates and Kleen air mod
BMC Race filter
PCIII with ignition module
VP U4.4
This map produced 118 to the rear wheel on a hot and steamy day at sea level.

I also have a map for 93 octane pump gas.



 

·
Registered
Joined
·
11 Posts
2007 ZX6R

Akra full
Block off plates and Kleen air mod
BMC Race filter
PCIII with ignition module
VP U4.4
This map produced 118 to the rear wheel on a hot and steamy day at sea level.

I also have a map for 93 octane pump gas.




where is the file with the map my friend ? please if you have send me !!!!
 

·
Registered
Joined
·
885 Posts
where is the file with the map my friend ? please if you have send me !!!!
Yeah I'm not big on giving away what I paid for. I'll sell you the map file very cheap, but I can't just give it away.

PM if you would like to discuss.
 

·
Ninja Bike Forum Mod
Joined
·
22,254 Posts
You do realize that this is a database thread to share maps? If you aren't willing to do so then this probably isn't the thread for your posts.
 

·
Registered
Joined
·
885 Posts
You do realize that this is a database thread to share maps? If you aren't willing to do so then this probably isn't the thread for your posts.
Yeah, I realize that.

If you don;t like my offer, you can go spend $350- and have your own tuning done. I have a map, expertly tuned by a world renown tuner. If anyone wants it, I'm happy to sell a copy for like $20-.

$350-
-$20-
______
$330- savings, sounds like a pretty good deal to me.

The pump gas map, that I'll gladly share for free. It produced 112 to the rear wheel and we got an additional 1 1/2 FT # torque. But I can't seem to get it to upload, says the file type is wrong.

If anyone wants it, just PM me your e-mail addy. I'll send it over.
 

·
Registered
Joined
·
52 Posts
Installed a used PC3 today.
Pulled the current map off of it. Says it's custom, but I have no idea why.
No idea where it was from orig, so not sure what elevation or dyno is.

Comments say
Code:
2007-2008 Kawasaki ZX6R
Yoshimura RS-5 full exhaust
Stock or aftermarket air filter
WFO Motorsports custom map 
618-931-3087
 

Attachments

·
Registered
Joined
·
152 Posts
okayy goshhh its 340 ft lol
but i have a question.. i used the "full yoshi exhaust aftermarket or oem air filter" map from the power commander website. now what if i do the jumper mod? will i have to use the "euro specs full yoshi exhaust aftermarket or oem" map? since i read that doing the jumper mod converts the bike to euro specs i think..
and another question.. lets say i got something done to the bike making its engine a bit bigger like 374cc's will that significantly affect the map that i have to use?
 
1 - 20 of 71 Posts
Top