Kawasaki Motorcycle Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
41 Posts
If you are talking about the bolt that is actually on the servo motor, it is 5 X 18 mm.
BOLT-FLANGED,5X18



The bolt holding the servo motor itself is 6 X 60 mm. Or so the parts diagram claims.

BOLT-SOCKET,6X60
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top