Kawasaki Motorcycle Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1 (Edited)
01 ZX6R carb cleaning diaphragm assembly

I was cleaning my carbs and...

took off the back end on the carb (the black plastic part) where the rubber boot is. Upon pulling the diaphragm out, shit flew everywhere lol. I collected all the pieces and I don’t know how to put the needle back together with everything. Does anyone have a picture of the needle with the spring/all of the washers/o-rings in the correct order? I tend to turn into the hulk when doing tedious tasks. Please help!
 

·
Registered
Joined
·
3,820 Posts
I was cleaning my carbs and...

took off the back end on the carb (the black plastic part) where the rubber boot is. Upon pulling the diaphragm out, shit flew everywhere lol. I collected all the pieces and I don’t know how to put the needle back together with everything. Does anyone have a picture of the needle with the spring/all of the washers/o-rings in the correct order? I tend to turn into the hulk when doing tedious tasks. Please help!
Easiest thing to do would be to carefully take one of the other diaphrams out and see how it's put together.

Should look something like this -
 
1 - 2 of 2 Posts
Top