Kawasaki Motorcycle Forums banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
2,691 Posts
No it won't fit at all... if you're talking about the bolt on system, the '03 uses a slip on system, so no go. For the full system, it won't fit at the heads, and even if it did, it wasn't designed for the '02.

Akrapovic makes systems for the '01 that will work the same, the reason they don't show an '02 599cc engine is because they're a European make, and they got the 636cc ZX6R last year. The '01 will fit and work perfectly.

Good luck... also you could contact Lockhart Phillips, the US distributor, for more clarification.

"Keep yer feet on the pegs and your right hand cranked."
 

·
Registered
Joined
·
2,691 Posts
Well, for the '00-02 599cc model, they show a bolt-on option of #S-K6B01-C (carbon can) and #S-K6B01-T (ti can)...

For FULL systems, they don't seem to show a single part number, but the Evolution system includes a ti lead pipe #L-K6E1TL and cans (#M-TCE2/53 carbon or #M-TTE2/53 ti)... I'm sure if you contact Lockhart Phillips they'll have a single package part number. If you don't want to lose any bottom-end and aren't concerned about maxing your PEAK power, you're better off just replacing the cannister with the bolt-on options above imo... they just allow the bike to breathe better and won't cost you any low-end hp... and they still look beautiful... check out snowsurfer's post with his red '02 636 with the carbon can!!

Good luck !

"Keep yer feet on the pegs and your right hand cranked."
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top