Kawasaki Motorcycle Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
625 Posts
Discussion Starter #1
Anyone ever install a heal tech speedo healer and have it read 43mph,
Even with the bike off it reads 43mph, wondering if anyone else ran into this problem. I emailed heal tech but was hoping to get a faster response.

Thanks, Ryan
 

·
Registered
Joined
·
768 Posts
I don't have much experience with the speedohealer, but I do know it has a maximum speed recall function. I'm not sure if it times out but perhaps it's turned on without you knowing it?
 

·
Registered
Joined
·
625 Posts
Discussion Starter #3
Update: After looking at the bikes wire diagram and comparing it to the speedo healer diagram i came to the conclusion that the speedo healer was wired correctly, so i went outside and reset the speedo healer for the proper correction and everything works perfect.
 

·
Registered
Joined
·
625 Posts
Discussion Starter #5
How was it to hook up im looking to buy one soon.
The install was a breeze setting it is very easy also just remember once you set it not to unplug it because it does not retain info that was my problem, i set it, then unplugged it to neaten up the wires and had to reset it. If i didnt unplug it i would say 20 minutes start to finish for the install.
 
1 - 7 of 7 Posts
Top