Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi,

Last week a car hit me in the side on my '99 zx6r... Now I replaced the nose with the '01 nose. And also replaced the speedo/tacho.

It all looks great... But the biggest problem I have now, is that none of the functions on the speedo are working.

No lights
No revs
No speed
No blinker indicators
No oil light
No temp gauge
No etc. etc.

So If there is anyone with a pinout from both of the speedo's or both of the wiring, I would be very thankfull.

Thanx in advance

Lakes

Greetz from the Netherlands

PS Feel free to e-mail me @

[email protected]
 

·
Registered
Joined
·
363 Posts
You can check it out on the buykawasaki site. The front harness costs about $50 but I have seen them on ebay. Did you check the fuse and relay right behind the speedo?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
The problem is that the dash on a '99 and a '00 do not have the same pinout.

The connector is the same but I need toswitch some wires in the connector

Greetz
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top