Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
999 Posts
Discussion Starter #1
Unless your doing standups, then your bike will not do power wheelies in 2nd or 3rd. If you are doing standups then it will do it with stock gearing. Sit downs in 2nd=clutching it up. I think clutching it up is safer, I clutch my 954 up in 2nd because its easier to control coming up verses it coming up really fast under all power....just something to think about.

2002 954RR
2001 ZX6R (stunt bike)

http://home.sc.rr.com/minytrker/bike.htm
 

·
Registered
Joined
·
5 Posts
i tried clucthing many many times but i cant seem to get it up.. i dont know what i am doing wrong. i go about 40-50 miles an hour....rev the crap out of my motor and pop the clutch but it does come up at all...what is the proper way to do this
 

·
Registered
Joined
·
501 Posts
If u can not get it up the viagra might be what u need:D
As far as stock size, 15 on front and 40 on back.

"I love your butt, cause it is just the right size to loose my boot all up in it"
 

·
Registered
Joined
·
5 Posts
Whas up everyone...i am a noob to the board. i had a question the sizing of the sprockets. i have a 2002 zx6r and i wanted to know what the stock sizing is on the front and rear sprocket....and also what would be a good combination for doing wheelies in second and third on just throttle (not clutching)...thanks:)
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top