Kawasaki Motorcycle Forums banner


1185 Views 9 Replies 7 Participants Last post by  epx666
has anyone changed they're spockets?
the stock gearing is 15/40 frt/rr on my 2k1.
i want a little quicker acceleration, but i dont want to lose the top end. im looking at going up two in the rear.

any input is appreciated.
Not open for further replies.
1 - 1 of 10 Posts
Just to fill in a few blanks...
The only time you have to worry about wear caused by a small front sprocket is if you go 13t and smaller. The reason for this is because of the decreased radius the chain has to move through.
It took me about 15 minutes to change the front sprocket, and it's much cheaper. I bought mine at http://www.kneedraggers.com/ and had it in two days.

'99 ZX6R
'02 Raptor
'01 Wolverine
'87 Radian
1 - 1 of 10 Posts
Not open for further replies.