Kawasaki Motorcycle Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
So I low sided my bike (04 zx6r) about a week ago, and luckily the only real damage is that my exhaust got scratched up (thank god for frame sliders). My question is this: could I take a dremel tool with a metal brush and buff out the scratches? I'm not sure how much metal is left on the scratched area, but I wanted to see if anyone had tried this before I do something stupid. Thanks in advance for any help!

BTW - I have a Yoshimura RS-3 slip on, don't know if that changes anything. I'll post pics of the damage soon.
 

·
Registered
Joined
·
71 Posts
Nobody going to be able to give you a good answer with out some pics. It all depends on how deep the scratches are. Obviously you would want to start out with a course wheel and work your way to a real fine one. You can use a cordless drill, air drill, or a dremal. Anything along those lines will work. If you wanted to you can even do it by hand.
 
1 - 2 of 2 Posts
Top