Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
344 Posts
Discussion Starter · #1 ·
I just removed the front forks off the 2003 ZX636. They are going to a local shop to get Racetech Gold Valves (FMGV S2040) and Racetech 0.95 springs installed. The question is what are the torque values for the following:

Axle bolt:
Axle pinch bolts:
Brake calibre bolts:
Lower triple clamp fork pinch bolts:
Upper triple clamp fork pinch bolt:
Clip on pinch bolt:

Some day the Kawasaki service manual will come out (I haven't seen one yet) and I won't have to bug the forum for this kind of info.

Thanks in advance.
 

·
Registered
Joined
·
349 Posts
axle bolt: 94 ft/lbs
axle clamp bolts: 14.5 ft/lbs
front brake caliper bolts (mounting bolts): 25 ft/lbs
upper and lower fork clamp bolts: 14.5 ft/lbs
handlebar bolts: 18 ft/lbs

The manual has been out for at least 3 months. Some dude is even selling them on ebay.
 

·
Registered
Joined
·
344 Posts
Discussion Starter · #3 ·
Thanks, greatly appreciated.

I haven't looked for the manual for a while. Guess its time to take another look.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top