Kawasaki Motorcycle Forums banner
Status
Not open for further replies.
1 - 1 of 10 Posts

· Registered
Joined
·
5 Posts
DON'T USE A TOOTH BRUSH!!!!!!!!!!!!!

Dont use any brush, by using a brush you force all of the dirt that gets stuck to the chain lube down in to the o-rings. this is very bad dont do it! what you need to do is use a degreaser (you can use gas) spray the whole chain let it sit and spray again if you want you can use a cloth to wipe and then just spray your cain lube on. chain lube is only intended for the rollers. And remember always lube your chain when it is plenty warm right after a ride. and often they say 500 miles. just my imput! WiL
 
1 - 1 of 10 Posts
Status
Not open for further replies.
Top