Kawasaki Motorcycle Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Registered
Joined
·
126 Posts
dont know what size washer but shimming the needles should solve the problem if you are running lean up top! there are two ciruits the zx6r's carbs have, the low speed circuit is adjusted by the air bleed screws and high speed adjustment (over 4000rpm) is adjusted by modifying the components that make up the main jet.

off like a prom dress!
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top