Kawasaki Motorcycle Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
952 Posts
Discussion Starter · #1 ·
so what do you guys recomend on new clutch plates? OEM i hear is the best but they're alot more expensive. does EBC or Barnet make decent clutch plates?
 

·
Premium Member
Joined
·
4,776 Posts
I don't care for Barnett plates...the tabs are thin were they contact the basket...so the bike will often "pull" even when the clutch is pulled in.

EBC knows a thing or two about friction materials. I've used both their cork and kevlar clutches...and prefer the take-up feel of the kevlar. EBC recommends non-synthetic oil in there instructions...fwiw.

DP and Vesrah make clutch kits too...but they rival OEM prices.

So, if this confuses things more just go OEM. Check prices with OEMcycle.com on the factory parts (get the part number from Kawi's parts screen)...they run 15% or more off MSRP.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top