Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
169 Posts
Discussion Starter #1
just finished rebuilding my bike with various referbished parts and found out from the inspection that the front rotors and front rim are both very slightly bent. my question is other then a kawi 96-97 zx6r. what other year/make front rim and or rotors would be compatible? b/c new rotors are around 500 canadian for the set and a rim is going to be alot as well.
 

·
Registered
Joined
·
3,190 Posts
Ripped off. A pair of brand new, genuine Kawasaki rotors for a '95-'97 ZX-6R here costs about 356CD now. Cheap.

They used to be double that.

Back to the question, I've seen discs from a '98-'02 ZX-6R on a '95-'97 model, but i don't kow if they bolted straight on, or required some spacers.

Later model front wheels won't really fit, because they don't have the speedo drive assembly in them. I'd look at '94-'97 ZX-9Rs and '92-'95 ZXR750s, but they'd probably require different bearings and spacers to get them to fit.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top